The features at the edges of the Kumburgaz craft were identified from multiple independent pieces of complimenting evidence. One major piece of evidence is footage from 2015 which provided a real-time demonstration of one of these craft while it is engaged in generating its plasma cocoon around its hull. After examining the features on the Kumburgaz craft and reviewing this footage, along with several other pieces of evidence, I now had a much better idea of the technical setup of these features and now understood that they guide the electromagnetic field around the craft. Just like the ‘squiggles’ that I first identified on the STS103 craft in 2012, they too also serve to direct the pathway of these fields around the hull. I figured out that the trenches and the ‘squiggles’ both worked together in unison to facilitate the consistent free-flowing pathways of this field. These features at the edges of the craft perform the exact same function. When these craft activates these fields, the hull becomes magnetized and the pulsed lasers are drawn to their polarized locations, creating the repulsive forces between the opposingly pulsed lasers which are projected in opposite directions around the craft. This is the reason why there are gaps in the structure of their hulls. The laser tracks are confined between the magnetized segments and provide the frequency of the field being generated. The Kumburgaz craft also has multiple raised rivet-like features that decorate the entire hull and I learned that these act as distribution points to allow the field to spread and travel in 360 degrees around the hull. Once I understood all of this, I now had a much better understanding of the crafts design and the overall distribution of the plasma field that envelopes the craft.This now made identifying the features of the Kumburgaz craft extremely easy and I could now state with accuracy what these features are, as well as their designated task and how this all fits into the overall design. and this made identifying the exact same features on the Ontario craft a walk in the park. I had already identified the Ontario craft as being an identical model of craft as the Kumburgaz craft, and both are identical to the STS103 craft. The canopy section of the Kumburgaz craft had already been identified on the Ontario craft as well as the aft from the 1977 Colarez case., so It was already very well established that all three events are directly connected to the same source. This further identification of the features at the edges of the Kumburgaz craft not only assisted in unlocking more of the secrets of the saucers but now helped positively identify the exact same features on the Ontario craft. So now, I could twin these features to multiple events. So the Kumburgaz and Ontario events were now locked together through the matching features of the canopy and these waveguides at the tips of both of these craft. After identifying these matching features and understanding their role in the overall technical arrangement and how they process the electromagnetic field around their hulls, I was then able to go on and identify these same features on other craft at even more events. Immediately after identifying their function, I then came across a photograph taken in 1966 in Colorado and was now able to identify these same features on the craft in the 1966 photograph. This now allowed me to begin experimenting with overlaying the samples from Kumburgaz and Ontario and STS103. After conducting these overlay comparisons, I then recalled the Carlos Diaz encounters and recalled the ship inside its plasma cocoon and now began to conduct even further overlays with the STS103/Kumburgaz and Ontario and Colorado samples. Positive identifications were then also established between all of these events and it became clear that they are all identical models of alien spacecraft. So I have now identified a common source behind multiple landmark UFO cases and the accumulation of the evidence gathered from these multiple events now assisted in going on to identify the same source is behind even further UFO events. Two very separate events in the Hessdalen valley have been identified and attributed to the same source and its thanks to the evidence gathered from Kumburgaz, Ontario and the Carlos Diaz encounters that I have been able to positively identify the same source is behind these additional events in Norway. But the connections don’t end there. The footage from 2015 of the craft inside its plasma cocoon were key to making even further connections to other landmark UFO events going even further back in time. I was literally shocked to discover that this evidence chain of interconnected events also led al the way back to going on to solve the mystery of one of the most famous UFO events in history and it was all down to my knowledge of the Kumburgaz craft and the rivet like field distribution features that I had now identified on the hull of the Kumburgaz craft.The features on the tips of the craft from the footage from 2015 was cross-referenced against the Kumburgaz craft and another sample from Japan (also in 2015 and also with evidence gained from my STS61 research. All of these pieces of evidence helped me to identify the exact same features on a craft photographed in 1950 and yet another solid connection was established between all of these seemingly unrelated UFO events. It was beyond anything I had ever hoped to achieve and establishing a common source behind all of thse events was lightyears from merely discovering a solid physical craft in orbit, ten years beforehand. What I have discovered is going to shock the UFO community. It was most certainly a shock to my system, regardless of the immunity I have been building up for 23 years.The Carlos Diaz evidence was cross referenced against the Hessdalen evidence and from learning that the craft has circular areas surrounding the hull, I now further understood that these rotated the field around its body and the field lines would straighten out, creating runners or tracks for these circular areas to move along. These lasers are also visible on the STS103 mission images and were first identified in 2012. Once I had identified the features on the Carlos Diaz craft and made the connection to Hessdalen, this is when I then recalled the evidence gained from Sandra Whelan in Livingston Scotland on November 29th 1999 which featured in the Scottish Daily Record on December 3rd 1999 and yet another piece of this puzzle was solved. Sandra Whelans video evidence has one of these craft showing its plasma field oscilating around it, providing visual evidence of these features in operation.

The features at the edges of the Kumburgaz craft were identified from multiple independent pieces of complimenting evidence. One major piece of evidence is footage from 2015 which provided a real-time demonstration of one of these craft while it is engaged in generating its plasma cocoon around its hull. After examining the features on the Kumburgaz craft and reviewing this footage, along with several other pieces of evidence, I now had a much better idea of the technical setup of these features and now understood that they guide the electromagnetic field around the craft. Just like the ‘squiggles’ that I first identified on the STS103 craft in 2012, they too also serve to direct the pathway of these fields around the hull. I figured out that the trenches and the ‘squiggles’ both worked together in unison to facilitate the consistent free-flowing pathways of this field. These features at the edges of the craft perform the exact same function. When these craft activates these fields, the hull becomes magnetized and the pulsed lasers are drawn to their polarized locations, creating the repulsive forces between the opposingly pulsed lasers which are projected in opposite directions around the craft. This is the reason why there are gaps in the structure of their hulls. The laser tracks are confined between the magnetized segments and provide the frequency of the field being generated.

The Kumburgaz craft also has multiple raised rivet-like features that decorate the entire hull and I learned that these act as distribution points to allow the field to spread and travel in 360 degrees around the hull.

Once I understood all of this, I now had a much better understanding of the crafts design and the overall distribution of the plasma field that envelopes the craft.

This now made identifying the features of the Kumburgaz craft extremely easy and I could now state with accuracy what these features are, as well as their designated task and how this all fits into the overall design.

and this made identifying the exact same features on the Ontario craft a walk in the park.

I had already identified the Ontario craft as being an identical model of craft as the Kumburgaz craft, and both are identical to the STS103 craft. The canopy section of the Kumburgaz craft had already been identified on the Ontario craft as well as the aft from the 1977 Colarez case., so It was already very well established that all three events are directly connected to the same source. This further identification of the features at the edges of the Kumburgaz craft not only assisted in unlocking more of the secrets of the saucers but now helped positively identify the exact same features on the Ontario craft. So now, I could twin these features to multiple events.

So the Kumburgaz and Ontario events were now locked together through the matching features of the canopy and these waveguides at the tips of both of these craft.

After identifying these matching features and understanding their role in the overall technical arrangement and how they process the electromagnetic field around their hulls, I was then able to go on and identify these same features on other craft at even more events. Immediately after identifying their function, I then came across a photograph taken in 1966 in Colorado and was now able to identify these same features on the craft in the 1966 photograph. This now allowed me to begin experimenting with overlaying the samples from Kumburgaz and Ontario and STS103. After conducting these overlay comparisons, I then recalled the Carlos Diaz encounters and recalled the ship inside its plasma cocoon and now began to conduct even further overlays with the STS103/Kumburgaz and Ontario and Colorado samples. Positive identifications were then also established between all of these events and it became clear that they are all identical models of alien spacecraft. So I have now identified a common source behind multiple landmark UFO cases and the accumulation of the evidence gathered from these multiple events now assisted in going on to identify the same source is behind even further UFO events. Two very separate events in the Hessdalen Valley have been identified and attributed to the same source and its thanks to the evidence gathered from Kumburgaz, Ontario and the Carlos Diaz encounters that I have been able to positively identify the same source is behind these additional events in Norway.

But the connections don’t end there. The footage from 2015 of the craft inside its plasma cocoon were key to making even further connections to other landmark UFO events going even further back in time. I was literally shocked to discover that this evidence chain of interconnected events also led al the way back to going on to solve the mystery of one of the most famous UFO events in history and itb was all down to my knowledge of the Kumburgaz craft and the rivet like field distribution features that I had now identified on the hull of the Kumburgaz craft.

The features on the tips of the craft from the footage from 2015 was cross-referenced against the Kumburgaz craft and another sample from Japan (also in 2015 and also with evidence gained from my STS61 research. All of these pieces of evidence helped me to identify the exact same features on a craft photographed in 1950 and yet another solid connection was established between all of these seemingly unrelated UFO events.

It was beyond anything I had ever hoped to achieve and establishing a common source behind all of these events was lightyears from merely discovering a solid physical craft in orbit, ten years beforehand.

What I have discovered is going to shock the UFO community. It was most certainly a shock to my system, regardless of the immunity I have been building up for 23 years.

The Carlos Diaz evidence was cross-referenced against the Hessdalen evidence and from learning that the craft has circular areas surrounding the hull, I now further understood that these rotated the field around its body and the field lines would straighten out, creating runners for these circular areas to move along.

More information is now currently being rolled out.

PLEASE STANDBY.